The ProCurve 2910 al Switch Series consists of four switches: the ProCurve 2910-24G al and 2910-24G-PoE+ al Switches with 24 10/100/1000 ports, and the ProCurve 2910-48G al and 2910-48G-PoE+ al Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910 al Switch Series supports up to four optional 10 Gigabit Ethernet (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
More Information
More Information
SKU
J9148A-RFB
EAN
5711045956096
Specification
Management features
Multicast support
Yes
Switch type
Managed
Web-based management
Yes
Quality of Service (QoS) support
Yes
Switch layer
L3
Ports & interfaces
Copper ethernet cabling technology
10BASE-T, 100BASE-TX, 1000BASE-T
Basic switching RJ-45 Ethernet ports quantity
48
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
Console port
RJ-45
Network
IGMP snooping
Yes
Auto-sensing
Yes
Copper ethernet cabling technology
10BASE-T, 100BASE-TX, 1000BASE-T
Networking standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Full duplex
Yes
VLAN support
Yes
Spanning tree protocol
Yes
Routing entries
2000
Rate limiting
Yes
Port mirroring
Yes
Link aggregation
Yes
IP routing
Yes
Auto MDI/MDI-X
Yes
10G support
Yes
Virtual LAN features
VLAN support
Yes
Performance
Packet buffer memory
6 MB
Stackable
Yes
Processor frequency
515 MHz
Memory type
SDRAM
Internal memory
512 MB
Flash memory
4 MB
Built-in processor
Yes
Technical details
Form factor
1U
Product colour
Grey
Stackable
Yes
Processor frequency
515 MHz
Rack mounting
Yes
Built-in processor
Yes
Data transmission
Throughput
131 Mpps
Latency (1 Gbps)
2.9 µs
Latency (10 Gbps)
1.3 µs
Packet buffer memory
6 MB
MAC address table
16000 entries
Switching capacity
176 Gbit/s
Jumbo frames support
Yes
Security
SSH/SSL support
Yes
IGMP snooping
Yes
Access Control List (ACL)
Yes
DHCP features
DHCP server
Multicast features
Multicast support
Yes
Memory
Packet buffer memory
6 MB
Memory type
SDRAM
Internal memory
512 MB
Flash memory
4 MB
Design
Form factor
1U
Product colour
Grey
Stackable
Yes
Rack mounting
Yes
Power
AC input voltage
100 - 240 V
AC input frequency
50 - 60 Hz
Power consumption (typical)
556 W
Power over Ethernet (PoE)
Power over Ethernet (PoE)
Yes
Operational conditions
Storage temperature (T-T)
-40 - 70 °C
Storage relative humidity (H-H)
15 - 95%
Operating temperature (T-T)
0 - 55 °C
Operating relative humidity (H-H)
15 - 95%
Heat dissipation
667 BTU/h
Weight & dimensions
Width
442.5 mm
Depth
365.8 mm
Height
43.9 mm
Weight
5.88 kg
Manufacturer
HPE
Reviews
You're reviewing:
Hewlett Packard Enterprise ProCurve 2910al-48G-PoE+ Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey